FIRECHEM ABC or Multi-Purpose Extinguisher utilise a specially fluidised and siliconised mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B & C fires and will not conduct electricity back to the operator.

FIRECHEM CO2 Extinguishers units provide the power to respond quickly and effectively by design to protect against Class B ( flammable liquids and gases ) and Class C ( energised electrical equipment ) fires. These extinguishers are well suited for indoor use in furnace rooms, printing presses, pump rooms, electrical power panels and laboratories where wind does not affect discharge.

Clean Agent is the most powerful, Eco Friendly Fire extinguisher. FIRECHEM Clean Agents are designed to control and extinguish a fire in its incipient stage – before it has a chance to spread. Clean Agents are electrically non- conductive and non- corrosive, and there will be no damage to electronics and delicate mechanical devices. This fire extinguisher is suitable for fire of paper, wood, cloth, flammable liquids ( Petrol, Kerosene, Paints ) Gases ( LPG , Acetylene ) & Electricity started. With this you can virtually fight any type of fire.

FIRECHEM Foam type extinguisher is used for Classes A & B fires. Foam spray extinguishers are not recommended for fires involving electricity, but are safer than water if inadvertently sprayed onto live electrical apparatus. FIRECHEM has two types of Foam type Fire Extinguishers which are stored pressure type and cartridge type.

Basic set of FSD GIRS system consists of a back pack with shoulder straps and waist belts, a tank for holding the extinguishing agent ( foam/water )safety valve, a high pressure air cylinder, pressure reducer, pressure demand regulator and a discharge gun with original trigger operation. FSD GRIS System uses advanced supersonic technology based on the latest flow engineering dynamics which enables the mixing of the extinguishing agent and air to create uniform fine mist. The patented mixing technology creates high quality water mist /CAF at a low pressure of 9 bar at  the same time ensuring maximum lancing distance for safe fire fighting.